Add missing verilog file that is inadvertantly used.

src_SSITH_P3/xilinx_ip/component.xml

@@ -2148,6 +2148,11 @@
         <spirit:fileType>verilogSource</spirit:fileType>
         <spirit:userFileType>IMPORTED_FILE</spirit:userFileType>
       </spirit:file>
+      <spirit:file>
+        <spirit:name>hdl/Counter.v</spirit:name>
+        <spirit:fileType>verilogSource</spirit:fileType>
+        <spirit:userFileType>IMPORTED_FILE</spirit:userFileType>
+      </spirit:file>
       <spirit:file>
         <spirit:name>hdl/RevertReg.v</spirit:name>
         <spirit:fileType>verilogSource</spirit:fileType>

src_SSITH_P3/xilinx_ip/hdl/Counter.v

@@ -0,0 +1,75 @@
+
+`ifdef BSV_ASSIGNMENT_DELAY
+`else
+  `define BSV_ASSIGNMENT_DELAY
+`endif
+
+`ifdef BSV_POSITIVE_RESET
+  `define BSV_RESET_VALUE 1'b1
+  `define BSV_RESET_EDGE posedge
+`else
+  `define BSV_RESET_VALUE 1'b0
+  `define BSV_RESET_EDGE negedge
+`endif
+
+
+`ifdef BSV_ASYNC_RESET
+ `define BSV_ARESET_EDGE_META or `BSV_RESET_EDGE RST
+`else
+ `define BSV_ARESET_EDGE_META
+`endif
+
+
+// N -bit counter with load, set and 2 increment
+module Counter(CLK,
+               RST,
+               Q_OUT,
+               DATA_A, ADDA,
+               DATA_B, ADDB,
+               DATA_C, SETC,
+               DATA_F, SETF);
+
+   parameter width = 1;
+   parameter init = 0;
+
+   input                 CLK;
+   input                 RST;
+   input [width - 1 : 0] DATA_A;
+   input                 ADDA;
+   input [width - 1 : 0] DATA_B;
+   input                 ADDB;
+   input [width - 1 : 0] DATA_C;
+   input                 SETC;
+   input [width - 1 : 0] DATA_F;
+   input                 SETF;
+
+   output [width - 1 : 0] Q_OUT;
+
+
+
+   reg [width - 1 : 0]    q_state ;
+
+   assign                 Q_OUT = q_state ;
+
+   always@(posedge CLK `BSV_ARESET_EDGE_META) begin
+    if (RST == `BSV_RESET_VALUE)
+      q_state  <= `BSV_ASSIGNMENT_DELAY init;
+    else
+      begin
+         if ( SETF )
+           q_state <= `BSV_ASSIGNMENT_DELAY DATA_F ;
+         else
+           q_state <= `BSV_ASSIGNMENT_DELAY (SETC ? DATA_C : q_state ) + (ADDA ? DATA_A : {width {1'b0}}) + (ADDB ? DATA_B : {width {1'b0}} ) ;
+      end // else: !if(RST == `BSV_RESET_VALUE)
+   end // always@ (posedge CLK)
+
+`ifdef BSV_NO_INITIAL_BLOCKS
+`else // not BSV_NO_INITIAL_BLOCKS
+   // synopsys translate_off
+   initial begin
+      q_state = {((width + 1)/2){2'b10}} ;
+   end
+   // synopsys translate_on
+`endif // BSV_NO_INITIAL_BLOCKS
+
+endmodule