When DEBUG_WEDGE is defined, expose the last committed and next in the
reorder buffer PC and corresponding instruction via DMI registers, since
even when the core is wedged and we can't read GPRs etc we can still
interact with the debug module itself. Hopefully this proves useful for
debugging wedges.
Now able to run multiple ISA tests in a single simulation run
connected to remote debugger DSharp, using either hart_reset or
ndm_reset between tests to bring the system back into reset state.
All Debug Module commands working:
- dm_reset, hart_reset, ndm_reset
- break (set breakpoint)
- step
- continue (until breakpoint of 'halt' command)
- halt
- read/write GPR, FPR, CSR, memory
- elf_load
Detail: an "instruction-fetch" response from mmioplatform to core
should be an "InstFetch". This was true for successful fabric reads,
but on error responses it was wrongly returned as a "DataAccess"
response. This was causing a deadlock.
New method 'debug_external_interrupt_req' to support emulation of a
debug module starts at P3_Core interface and is plumbed all the way in
to the CSR register MIP as interrupt [14]. The corresponding MIE[14]
is always 1, so it is never masked. Still todo: should not be masked
by MSTATUS interrupt-enables either. Also expanded
interrupt-detection logic, mcause etc. to extend up to interrupt 14.
Builds in standalone mode, runs ISA tests.
Builds in src_SSITH_P3, generating RTL.
