When a CSRRx instruction writes to FCSR/FFLAGS/FRM, the CPU also
changes MSTATUS.FS and, by implication, MSTATUS.SD because the
floating point state has become "dirty". Tandem Verification
trace-generation was not reporting this update.
src_Core/CPU/CsrFile.bsv
Various fixes for WARL'd values of mstatus and sstatus, medeleg,
Added tval field in Trap_Updates returned by csrf.trap
src_Core/Core/Trace_Data2.bsv
Added fields for store_data and store_data_BE
src_Core/Core/Trace_Data2_to_Trace_Data.bsv
Added treatment of store_data and store_data_BE
Fixed bug in next_pc for mkTrace_RET
src_Core/RISCY_OOO/procs/RV64G_OOO/CommitStage.bsv
Fixed Trace_Data2 struct to TV for pc in case of xRET, and tval in case of trap
src_Core/RISCY_OOO/procs/RV64G_OOO/MemExePipeline.bsv
Added store_data and store_data_BE in calls to rob_setExecuted_doFinishMem
src_Core/RISCY_OOO/procs/lib/ReorderBuffer.bsv
Added store_data and store_data_BE in methods rob_setExecuted_doFinishMem
Now handling all Alu and Fpu pipeline outputs, traps and xRets.
Still todo:
(1) Mem pipeline outputs (Ld, Lr/Sc, Amo outputs to dest reg)
(2) For CSRRx, currently reporting WARL pre-write updates; needs to be WARL'd update.
Rd value (destination register) of Integer ops supported
Trap updates (priv and CSR updates) supported.
Still pending: Memory ops Rd value, Fpu Rd value
Now able to run multiple ISA tests in a single simulation run
connected to remote debugger DSharp, using either hart_reset or
ndm_reset between tests to bring the system back into reset state.
All Debug Module commands working:
- dm_reset, hart_reset, ndm_reset
- break (set breakpoint)
- step
- continue (until breakpoint of 'halt' command)
- halt
- read/write GPR, FPR, CSR, memory
- elf_load
After a test, GDB can write DCSR to restore to Machine privilege,
write to PC (DPC) to restore boot value,
write MSTATUS to restore to initial value,
then can load and run next test.
Stop, set breakpoint: working, stopping successfully.
Step: working: stops after a step.
Continue (resume) working after Stop and Step, but not after stop by breakpoint (needs debugging)
Read/Write GPRs, FPRs, CSRs, memory working.
New method 'debug_external_interrupt_req' to support emulation of a
debug module starts at P3_Core interface and is plumbed all the way in
to the CSR register MIP as interrupt [14]. The corresponding MIE[14]
is always 1, so it is never masked. Still todo: should not be masked
by MSTATUS interrupt-enables either. Also expanded
interrupt-detection logic, mcause etc. to extend up to interrupt 14.
Builds in standalone mode, runs ISA tests.
Builds in src_SSITH_P3, generating RTL.
